HDJS768

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	95	98	102	105
	Screw L/D Ratio	-	20	19.3	18.6	18.0
	Injection Volume	cm³	3131	3332	3610	3825
	Shot Weight	g	2851	3032	3285	3481
	Injection Pressure	Mpa	172	162	149	141
Clamping Unit	Clamping Force	KN	7680
	Opening Stroke	mm	970
	Mould Thickness(Min-Max)	mm	380-940
	Space Between Tie-Bars	mm	960×950
	Ejector Force	KN	180
	Ejector Stroke	mm	260
General	Motor Power	KW	30+41
	Heater Power	KW	49
	Pump Pressure	Mpa	16
	Machine Dimension	m	10.0×2.4×3.2
	Machine Weight	T	35

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter