HDJS2800

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	175	185	200	220
	Screw L/D Ratio	-	20	20	20	20
	Injection Volume	cm³	25578	28493	33301	44095
	Shot Weight	g	23276	25929	30304	40127
	Injection Pressure	Mpa	163	146	139	137
Clamping Unit	Clamping Force	KN	28000
	Opening Stroke	mm	2000
	Mould Thickness(Min-Max)	mm	800-1850
	Space Between Tie-Bars	mm	1950×1850
	Ejector Force	KN	565
	Ejector Stroke	mm	480
General	Motor Power	KW	55×4/55×5
	Heater Power	KW	149.2/180
	Pump Pressure	Mpa	16
	Machine Dimension	m	20.5×4×4
	Machine Weight	T	205/210

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter