HDJS3300

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	180	200	220	240
	Screw L/D Ratio	-	20	20	20	20
	Injection Volume	cm³	22393	33300	44095	55191
	Shot Weight	g	20377	30303	40126	50224
	Injection Pressure	Mpa	139	139	137	146
Clamping Unit	Clamping Force	KN	33000
	Opening Stroke	mm	2150
	Mould Thickness(Min-Max)	mm	800-1900
	Space Between Tie-Bars	mm	2160×1950
	Ejector Force	KN	814
	Ejector Stroke	mm	500
General	Motor Power	KW	55×4
	Heater Power	KW	150
	Pump Pressure	Mpa	16
	Machine Dimension	m	21.0×4.2×5.3
	Machine Weight	T	230

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter