HDJS2000

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	140	150	160	180
	Screw L/D Ratio	-	22.4	20.9	19.6	20
	Injection Volume	cm³	11083	12723	14476	24798
	Shot Weight	g	10085	11578	13174	22566
	Injection Pressure	Mpa	154	135	120	118
Clamping Unit	Clamping Force	KN	20000
	Opening Stroke	mm	1680
	Mould Thickness(Min-Max)	mm	700-1600
	Space Between Tie-Bars	mm	1650×1550
	Ejector Force	KN	406.9
	Ejector Stroke	mm	450
General	Motor Power	KW	55+55+55
	Heater Power	KW	95
	Pump Pressure	Mpa	16
	Machine Dimension	m	16.4×3.6×4.3
	Machine Weight	T	48

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter