HDJS2500

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	160	175	185	200
	Screw L/D Ratio	-	19.6	20	20	20
	Injection Volume	cm³	17693	25578	28493	33301
	Shot Weight	g	16101	23276	25929	30304
	Injection Pressure	Mpa	138	163	146	139
Clamping Unit	Clamping Force	KN	25000
	Opening Stroke	mm	1850
	Mould Thickness(Min-Max)	mm	700-1800
	Space Between Tie-Bars	mm	1820×1720
	Ejector Force	KN	565
	Ejector Stroke	mm	480
General	Motor Power	KW	55×4
	Heater Power	KW	140
	Pump Pressure	Mpa	16
	Machine Dimension	m	18.5×4×4.5
	Machine Weight	T	185

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter