HDJS538

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	80	85	90
	Screw L/D Ratio	-	21.1	19.9	18.8
	Injection Volume	cm³	2069	2336	2619
	Shot Weight	g	1883	2126	2383
	Injection Pressure	Mpa	178	158	141
Clamping Unit	Clamping Force	KN	5380
	Opening Stroke	mm	780
	Mould Thickness(Min-Max)	mm	300-800
	Space Between Tie-Bars	mm	810×810
	Ejector Force	KN	125
	Ejector Stroke	mm	220
General	Motor Power	KW	55
	Heater Power	KW	27
	Pump Pressure	Mpa	16
	Machine Dimension	m	8.5×1.9×2.3
	Machine Weight	T	16

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter