HDJS288

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	60	65	67
	Screw L/D Ratio	-	21.7	20	19.4
	Injection Volume	cm³	664	780	828
	Shot Weight	g	604	710	753
	Injection Pressure	Mpa	190	162	152
Clamping Unit	Clamping Force	KN	2880
	Opening Stroke	mm	610
	Mould Thickness(Min-Max)	mm	220-630
	Space Between Tie-Bars	mm	610×610
	Ejector Force	KN	70
	Ejector Stroke	mm	165
General	Motor Power	KW	30
	Heater Power	KW	18
	Pump Pressure	Mpa	16
	Machine Dimension	m	6.5×1.6×2.2
	Machine Weight	T	8.5

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter