HDJS1250

Parameters :

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	120	130	140
	Screw L/D Ratio	-	21.7	20	18.6
	Injection Volume	cm³	6503	7632	8851
	Shot Weight	g	5918	6945	8055
	Injection Pressure	Mpa	178.8	152.3	131.4
Clamping Unit	Clamping Force	KN	12500
	Opening Stroke	mm	1250
	Mould Thickness(Min-Max)	mm	550-1280
	Space Between Tie-Bars	mm	1260×1260
	Ejector Force	KN	282.6
	Ejector Stroke	mm	350
General	Motor Power	KW	55+55
	Heater Power	KW	78
	Pump Pressure	Mpa	60
	Machine Dimension	m	12.8×3.1×4
	Machine Weight	T	70

Standard Device :

1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem

Standard Accessories :

1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil.

Selectable :

1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter